 |
 3M™ Vapor Cartridges NIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from certain organic vapors and gases including Gases for certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
Case(s)/60 Cartridges
Stock Number: 70070316735
UPC: 0-51138-28883-4
|
|
|
 3M™ Cartridge/Filter 60921, Organic Vapor/P100NIOSH approved against certain organic vapors and particulates. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications including petrochemical, construction, transportation and chemical manufacturing. When properly fitted, helps provide respiratory protection from certain organic vapors and particulates, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use for sandblasting or in environments that are immediately dangerous to life or health (IDLH).
Case(s)/60 Filters
Stock Number: 70070614485
UPC: 0-51138-46465-8
|
|
|
 3M™ Spectacle Kit 6878/071413M™ Spectacle Kit 6878/07141
Use with 3M™ Full Facepiece Respirators 6000 Series. It permits the wearer to use his/her corrective lenses and to make position adjustment that is most comfortable.
Stock Number: 70070709079
UPC: 0-51131-07141-4
|
|
|
 3M™ Mold Remediation Respirator Kit 67097, SmallIncludes a 3M™ Full Facepiece 6000 and two pairs of 3M™ Particulate Filters 2097, P100, to help reduce exposure to mold and low level organic compounds produced by mold.
This kit is the simple, one stop solution to help provide respiratory protection during most mold remediation activities such as vacuuming, sanding, removal and disposal. A separate chemical cartridge may be needed for exposure to disinfectants. (See disinfectant MSDS for more information.)
Case(s)/2 Kits
Stock Number: 70071090198
UPC: 0-51131-52791-6
|
|